Español
ASTM A53 Steel Pipe is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines.
ASTM A53 pipe (also referred to as ASME SA53 pipe) is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging, subject to certain qualifications.
Steel grade:
ASTM A53 Grade.A
ASTM A53 Grade.B
ASTM A53 Steel Pipe Specifications
A53 pipe comes in three types (F, E, S) and two grades (A, B).
A53 Type F is manufactured with a furnace butt weld or may have a continuous weld (Grade A only)
A53 Type E has an electric resistance weld (Grades A and B)
A53 Type S is a seamless pipe and found in Grades A and B)
A53 Grade B Seamless is our most polar product under this specification and A53 pipe is commonly dual certified to A106 B Seamless pipe.
Pipe ordered under this specification is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging, subject to the following qualifications:
1.Type F is not intended for flanging.
2.When Types S and E are required for close coiling or cold bending, Grade A is the preferred grade. This provision is not intended to prohibit the cold bending of Grade B pipe.
3.Type E is furnished either nonexpanded or cold expanded at the option of the manufacturer.
Chemical Composition
Chemical Properties %
|
|
Grade |
C, max |
Mn, max |
P, max |
S, max |
Cu*, max |
Ni*, max |
Cr*, max |
Mo*, max |
V*, max |
|
Type S(Seamless) |
A |
0.25 |
0.95 |
0.05 |
0.05 |
0.4 |
0.4 |
0.4 |
0.15 |
0.08 |
|
B |
0.3 |
1.2 |
0.05 |
0.05 |
0.4 |
0.4 |
0.4 |
0.15 |
0.08 |
|
|
Type E (Electric-resistance Welded) |
A |
0.25 |
0.95 |
0.05 |
0.05 |
0.4 |
0.4 |
0.4 |
0.15 |
0.08 |
|
B |
0.3 |
1.2 |
0.05 |
0.05 |
0.4 |
0.4 |
0.4 |
0.15 |
0.08 |
|
|
Type F (Furnace-welded) |
A |
0.3 |
1.2 |
0.05 |
0.05 |
0.4 |
0.4 |
0.4 |
0.15 |
0.08 |
Note: The total composition for these five elements shall not exceed 1.00%.
Mechanical Properties
|
|
Grade A |
Grade B |
|
Tensile Strength, min., psi, (MPa) |
48,000 (330) |
60,000 (415) |
|
Yield Strength, min., psi, (MPa) |
30,000 (205) |
35,000 (240) |
Note: This is summarized information from ASME Specification A53. Please refer to the specific Standard or Specification or contact us for more details.
Applications
1.Construction: the pipeline underneath, the groundwater, and the hot water transportation.
2.Mechanical processing, bearing sleeves, processing machinery parts, etc.
3. Electrical: Gas delivery, Hydroelectric power fluid pipeline
4.Anti-static tubes for wind power plants, etc.
