product

Centerway steel co., ltd
ssaw pipe factory,lsaw carbon steel pipe,steel sheet pipe piling

  • ASTM A501/A501M

    ASTM A501 covers black and hot-dipped galvanized hot-formed welded and seamless carbon steel square, round, rectangular, or special shape structural tubing for welded, riveted, or bolted construction of bridges and buildings, and for general structural purposes.

    The term Hollow Structural Sections (HSS) refers to high-strength welded steel tubing used as structural elements in buildings and other structures and a variety of manufactured products. It is produced in round, square and rectangular shapes and a broad range of sizes to the ASTM A500, A501, A1085, A1065 specifications.

    Sizes：

    Square Tubing: OD: 1" x 1" - 32" x 32" x Thk.: 0.100" - 3.000"  (25 x 25mm - 800 x 800mm x Thickness: 2.5 - 75 mm)

    Rectangular Tubing: OD: 1" x 1.5" - 22" x 32"  x Thk.: 0.100" - 3.000" (25 x 38mm - 500 x 800mm x Thickness: 2.5 - 75mm)

    ASTM A501 Round Tubing is furnished in size:

    OD: NPS 1/2" - NPS 24" (DN15 - DN 600 or 21.3 - 609.6mm)  x Thickness: 0.109" to 1.000". (2.8 to 25.4 mm), dependent upon size. 

    Special Shape Tubing and tubing with other dimensions is permitted to be furnished, provided that such tubing complies with all other requirements of this specification.

    NOTE: The dimensionless designator NPS [DN] (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”

    ASTM A501 covers the following grades:

    Chemical Component(%)

    Grade

    C

    M

    P

    S

    Cu

    Gr.A

    0.26

    1.35

    0.035

    0.035

    0.20

    Gr.B

    0.30

    1.40

    0.045

    0.045

    0.18

    Gr.C

    0.23

    1.35

    0.035

    0.035

    0.20

    Gr.D

    0.27

    1.40

    0.045

    0.045

    0.18

    Mechanical Properties Min (MPa)

    Grade

    Tensile Strength

    Yield Strength

    Elongation

    Gr.A

    310

    230

    25

    Gr.B

    400

    290

    23

    Gr.C

    425

    315

    21

    Gr.D

    400

    250

    23

    Equivalent Grades: EN 10219-1/EN 10210-1 S355, ASTM A500 Gr.B, GB/T 3091 Q355B, JIS G3444/3466 STK/STKR490

Recommended

  • ssaw pipe factory,ssaw pipe suppliers,ssaw pipe manufacturers
    LSAW Pipe
    Product Dimension:WELD:0219-3000mm,WT:6mm-200mm.Length:3.0m-200m Standard:API SPEC 5L PSL1&PSL2,ISO 3183,ASTM A53,ASTM A500,ASTM A252,ASTM A671,ASTM A672, ASTM A691,EN10210,EN10217,EN10219 etc Grades:Grade A/B,X42-X80,PSL1&PSL2, B50,B60,B70,C60,C65,C70,CC60,CC65, CC70,CB60,CB65. CB70,Q215-345,GradeA-E,Grade 1-3,STK290-540,S275JRH, S275JOH,S275J2H,S355JRH, S355JOH,S355J2H,P355NH, P355GH,S460JR,S460J0,S460J2,P460NH, P460GH
  • spiral welded steel pipe,lsaw line pipe,a252 pipe
    EFW Pipe
    Standards&Grades： ASTM A671/ A671M, ASTM A672, ASTM A691, ASTM A692 B50, B60,B70,C60,C65,C70,CC60,CC65,CC70, CB60, CB65,CB70 Outside Diameter:14"OD to 72" OD Wall thickness: 8.0mm-200mm Length：4-12.5m Uses: Used for Pressure vessel pipeline.
  • astm a252 steel pipe casing,spiral welded pipe piles,a252 pipe
    JOCE Pipe
    The continuous shaft twisting J-C-O (J-ing, C-ing and O-ing) process is adopted, which has the characteristics of high forming accuracy, high efficiency and uniform forming stress distribution. The outer diameter of the production specification is Φ356~Φ1626mm, the wall thickness is 6~50mm,It is mainly used for transportation pipes for various purposes such as petroleum, chemical industry, natural gas, electricity, city gas, water supply and drainage, and is also widely used in construction, bridges, docks and other engineering fields.
  • ssaw pipe factory,ssaw pipe suppliers,ssaw pipe manufacturers
    Rolled Steel Pipe
    OD:Φ324mm-Φ7000mm, WT:8mm-200mm, ; Length:3m-70m.
  • ssaw pipe manufacturers,hfw pipe,lsaw welded steel pipe
    Piling Pipe
    Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572 , JIS Out Diameter: 219.1mm–3048mm Wall Thickness: 5.0mm-30mm Length: Up to 70m Steel Grade: API 5L: GR A, GR B, X42,X46, X56, X60,X65,X70 ASTM A252 GR 1, GR 2, GR 3 ASTM A53: GR A, GR B, GR C, GR D BS 4360: Grade 43, Grade 50 EN: S275, S275JR, S355JRH, S355J2H Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer’s requirement
We use cookies and other tracking technologies to improve your browsing experience on our website, to show you personalized content and targeted ads, to analyze our website traffic, and to understand where our visitors are coming from,This behavior is in compliance with the user consent policy.
Accept
Decline